top of page

Load data for:

.45 Blaser || .458 | 300gr | H&N TC H

You need to be a member to bookmark a  load - more info here!

Load data for caliber  .45 Blaser with .458 | 300gr | H&N TC Hundefined

Technical Specifications

Bullet:
.458 | 300gr | H&N TC H
Bullet Weight:
300gr | 19.4g
Bullet Diameter:
0.458" | 11.63mm
Bullet Length:
0.781" | 19.8mm
Caliber:
.45 Blaser
Case Length (l3):
2.146" | 54.5mm
Cartridge Length (C.O.L.):
2.657" | 67.5mm
Seated Depth:
0.270" | 6.9mm
Shank Seated Depth:
0.250" | 6.4mm
Case Capacity:
84.0 Grains of Water | 5.45 cm3
Max. allowed Pressure:
53664 psi | 3700 bar
Primer Size:
Large Rifle Magnum (LRM)
LID:
LID_B7551_C728
All load data for bullet manufacturer H&N

Load  description

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

  • Applied measure system: imperial .You can change setting in your account > Profile > Bottom of Page

    • a load must fulfill certain criteria to be listed below - see here.

    • our load data might deviate from other sources - see most common reasons here

    • all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.

    • you can set your own specifications in the "Personalized Load Calculator"

    • Go to "My Account " bottom of the page to define the measure system (imperial vs. metric) 

  • No data yet

  • .

You can add a specific load / powder from below to your Diary and manage there. 

select powder first

>> add to My Diary

you have over 25 entries already. Go to your Diary and delete some to add new ones.

added successfully

>> go to Diary

Powder
Charge
FR
MaxP
%
V(0)
z
Max Load - Barrel Length: 23.6" | 60.0cm
Powder
Charge
FR
MaxP
%
V(0)
z
Start Load - Barrel Length: 23.6" | 60.0cm


FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feets per second (fps)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

bottom of page